SANlicht LINE

The 230V track configurator plans the three-phase GLOBAL trac track in 3D: On-Off or DALI, surface-mounted or recessed, in white or black. Draw the track runs freely on the grid or drag parts from the catalogue into the scene. The planner derives the connectors for straight joints, corners, T and cross junctions as well as the end caps from the geometry; you place the feed-in at a suitable node. Adapters for spotlights and pendant luminaires go straight onto the track, suspension sets come in as accessories. Tracks can be cut to length; we cut them for you on request. The layout produces a bill of materials with positions, quantities and article numbers. It becomes visible once you sign in with your Santec shop account, then with your prices. Without an account, you send the plan as a request and we prepare the quote. “Share” passes the layout on as a link; AR places it full-size in the room via your phone camera. The planner’s interface is in German.

The 48V MAG configurator plans the SANlicht MAG magnetic track system on 48 V DC with DALI. You choose MAG II LOW as a flat surface track, MAG II as a surface track with curved corners or MAG IN for recessed ceiling installation, each in white or black. Draw the tracks in 3D or in the 2D view and add luminaires from more than a dozen MAG families, such as Miky, Luky or Magline III. The planner adds connectors and end caps. It sizes the drivers from the total luminaire load with a 20 per cent reserve; you can enter your own driver instead. Flexible connectors and curved corners R300 to R600 are placed by hand, and a track can also run vertically down a wall. The result is a bill of materials with article numbers, visible with your Santec shop account and your prices. Without an account, send the plan as a request, with a floor plan if you have one. The interface is in German.

The profile configurator runs at our partner led-labs.eu and builds aluminium profile luminaires from the Lumines range. In seven steps you choose the room and mounting type (surface, suspended, recessed or shelf), the shape from a straight run through L, U and rectangle to a custom outline, the profile and its dimensions to the millimetre, profile colour and cover, LED strip with colour temperature and output, power supply and control, and finally suspension, cable and end caps. On request, the configurator adjusts the length to the cutting points of the LED strip. At the end you get the system designation and product code, plus a datasheet, mounting instructions, a declaration of conformity and 3D files (IFC, DAE) to download. The project can be saved, shared and viewed in AR. “Send request” passes the configuration to us, also without registering, and we come back to you with a quote.